Brass Bridge Mounting Bushings for Jazzmaster/Jaguar/Mustang - 4 Pieces, 2 Sets

These are brass bushings designed to stabilize the wobbly bridges found on Fender Jazzmaster, Jaguar, Mustang, and similar models.
Each set contains 2 sets = 4 pieces.

Recommended for those who want to avoid plastic bushings, increase the rigidity around the bridge, or prioritize a metallic resonance and clarity.

Made from unplated brass, these are relatively easy to work with even if they interfere with other parts.

[Dimensions]
- Total length: 6.5mm
- Diameter on the bridge post side: 6.5mm
- Diameter on the anchor side: 8mm
- Flange diameter: 13mm
- Flange thickness: 1.5mm
- Length under flange: 5mm

[Notes]
Bridge dimensions can vary depending on the guitar's manufacturer, year, and individual unit.
Therefore, they may be tight, loose, or interfere during installation.

- If too tight: Apply lubricant or file down.
- If too loose: Wrap masking tape or aluminum tape around the bridge post for adjustment.

Additionally, on units with significant misalignment of the bridge post holes, the flange may interfere with the pickguard.
In such cases, filing down the flange may resolve the issue.

We cannot guarantee compatibility due to dimensional differences or individual variations, so please be sure to measure your own guitar accurately.

*These parts are not designed to replace the studs/anchors in the body.
If the size is correct, you can install them by simply removing the strings and bridge.
Since the bridge itself becomes free once the strings are removed, no major disassembly is required.

[Installation Example]
Fender MIJ HYBRID II Jazzmaster
(See photo; the flange interfered with the pickguard, so it was filed down with a needle file.)

[Material Characteristics]
As these are made of unplated brass, there may be minor scratches, dullness, or color changes due to oxidation.

#JazzMaster
#Fender
#Jaguar
#Mustang
#ElectricGuitar