Vivaria Taiyo NEO RP-126V Reptile Light Heat Bulb UV Bulb Clip Stand

Purchased new, but selling due to safety concerns with small children.
Used for only about 1 hour, and the condition is very good ◎

It's in near-unused condition, so it's recommended for those looking for this item!
Immediate purchase is OK, please consider it.

[Product Description]
Freely target hot spots!
Vivaria Taiyo NEO
Target: Amphibians, Reptiles
Features:
This is a clip stand for lighting for reptiles and amphibians.
Features a swan arm that allows you to freely target hot spots.
Uses a heat-resistant ceramic socket and can also be used with ceramic heaters.
Safety is also considered with a sturdy spring clip and a safety double lock to prevent falling.
Non-slip rubber grip securely holds the edge of the cage.
The power cord has an intermediate switch and is approximately 2m long.
Quantity: 1
Specifications:
Rated Voltage/Frequency: AC100V 50/60Hz
Power Consumption: 100W
Base: E26
Applicable Bulb: E26 100W bulb
Size (approx.):
Main unit: Width 10 x Depth 6.5 x Height 13.5 cm
Power cord length: 2m
How to use:
Attach to the edge of the cage and use.
Country of Origin: China
Caution:
This product is for amphibian and reptile keeping. Do not use for any other purpose.
The base type of this product is E26. Please be sure to check the compatible lamp.
When installing this product or attaching/removing the lamp, turn off the power of this product. This may cause electric shock or burns.
Do not touch this product or the lamp with wet hands. This may cause electric shock or burns.
Keep flammable materials away from this product. This may cause fire.
Install the lamp so that it does not directly touch the living creature, the main body, frame, or glass surface of the cage. This may cause fire or burns.
Ensure that this product is installed securely so that it does not fall. When installing, check for any loose screws. If it falls, it may cause fire or burns.
After installing this product, retighten all screws with a coin or similar tool. If the screws on the swan arm or safety double lock are loose, they may touch the living creature, cage, or substrate, causing fire or burns.